Welcome to the official website of Shenzhen Guangjiayuan Electronic Technology Co., Ltd!

  Mr. Chen:136-6225-2835

  Miss Chen:189-2385-0895

Your current location : Home__Product__usb2.0 interface__usb large current

Contact Us

Shenzhen Guangjiayuan Electronic Technology Co., Ltd

Mr. Chen: 136-6225-2835 (same WeChat account)

QQ: 979285705

Miss Chen: 189-2385-0895 (same WeChat account)

QQ: 2391552662

Chen Weiting 135-3824-4786 (same WeChat account)

Tel: 86-0755-33182327

Email: gjydz88@163.com

Website: www.usb-type.com

Address: Building 10, Hongxing Gebu Qixiang, Songgang Town, Bao'an District, Shenzhen, Guangdong Province

Sink board USB AF 5P high current female base, no flange four foot sink board welding

Sink board USB AF 5P high current female base, no flange four foot sink board welding

  • category:usb large current
  • Release Date:2021-05-21
  • No flanging/flanging four foot sink board with a size of 1.2/1.8/3.2mm can be selected. USB AF 5PIN over 5A high current interface mother base, middle foot grounding pin function, blue rubber core 5.7MM/short body length 10.8mm * width 15.9mm four foot through board welding, widened power pins next to the terminal, gold plated 3U positive and negative welding, and the iron shell is plated with 80U "(MIN) tin/salt spray for 24h.

  • Product Introduction

The material of the USB AF 5P high current base without flange sink plate is as follows:

Specifications:

Electrical characteristics:

1. Rated current: Current Rating5A/contact terminal

2. Rated voltage: Voltage Rating 30V DC

3. Contact Resistance: 30 milliohms MAX

4. Dielectric Withstanding Voltage: 500V AC AT Sea Level

5. Insulation Resistance: 1000MEGA ohms MIN

Physical performance: Mechanical:

1. Insertion and extraction force: Cconnector Mate and Unmate Force

Mate force: 3.57kgf (MAX)

Unmate force: 1.02kgf (MIN)

2. Terminal retention force: Terminal Retention 1.0kgf (MIN)

Material:

1. Plastic: Housing: High Temperature LCP green/blue/red

2. Terminal: Contact: Copper Alloy C2680

3. Shell: Copper Alloy C2680/SPCC

Electroplating: Finish:

1. Terminal: Contact: Pieted Gold in Mating Area;

Tin On Solder Talls

50U "(MIN) tin plating on the four sides of the terminal, and 100-200U" gold plating on the gold-plated area for 3U“

2. Shell:

Iron shell plated with 80U "(MIN) tin salt spray on all sides for 24 hours

Nickel Plating


USB 5P沉板母座

With the development of technology, the transmission interfaces of electronic products tend to integrate all functions into one transmission interface. Among various transmission interfaces, the most widely used should be the USB transmission interface. At present, the mechanical standard of USB has developed to the so-called Type-C, which has 24 pins and can support a considerable variety of working modes.

Currently, most chips used for USB connectors correspond to different working modes of USB with each pin of the chip. However, as mentioned above, due to the large number of functions or working modes currently supported by USB, if each pin of the chip corresponds to different working modes of USB, it will cause an excessive number of pins on the chip, and the packaging size and cost of the chip will also increase accordingly. In addition, due to the increasing length of wiring connecting the chip pins, the performance of the chip may be severely affected in high-frequency applications.

Source: http://www.gjydz.com/html/product_392.html

contact information

Contact person: 

    Mr. Chen 136-6225-2835 (same WeChat account)

    Miss Chen 189-2385-0895 (same WeChat account)

    Chen Weiting 135-3824-4786 (same WeChat account)

Address: 

    Building 10, Hongxing Gebu Qixiang, Songgang Town, Bao'an District, Shenzhen, Guangdong Province




Technology 1 Technology 2